Established 1989 - World wide distribution

Home Up Feedback Site's Map Search Directions to DKC About Us

Construction       

 

Dynasty Kitchen Cabinets Basics: 

Cabinet front frames are 3/4" thick, solid hardwood. Raised panel doors have kiln-dried, 9/16" thick solid wood center panels, door stiles and rails or 3/4" medium density fiber board laminated with rigid thermofoil. Solid wood raised center panels are inserted into door frame grooves where concealed, flexible vinyl inserts allow for expansion and contraction without damage to the construction of the door. Flat panel lines have a veneered plywood center panel. Fully adjustable shelves are 3/4" thick and interchangeable between wall base and cabinets. Drawer fronts are 3/4" thick solid wood with machine edge profiles to match the door frame or 3/4" thick medium density fiber board laminated with rigid thermofoil.

bullet1. Strong 3/8" top and bottom panels are fully laminated on both sides for added durability.
bullet2. Distinctive solid wood or thermofoil raised panel doors and drawer fronts.
bullet3. Fully adjustable self-closing furniture hinges or concealed hinges come with a lifetime manufacturer’s warranty.
bullet4. Easy-to-clean laminated interiors provide long lasting performance.
bullet5. Stain is applied by hand to achieve a rich furniture finish enhancing the grain patterns.
bullet6. A full 3/4" hanging strip provides for a secure and easy installation.
bullet7. 3/4" adjustable wall and base shelves are secured with locking clips. available that create a fine-furniture appeal.

How to measures 

 

Walls, window (s) and door (s)
1-  Measure the total width of each wall
2-  For each window:
a)  Measure the distance from the left edge of the window frame to the left corner of the wall. Repeat for the right side of the window.
b)  Measure width of the window including the frame.
3-  For each door:
a)  Measure the distance from the left edge of the door frame to the left corner of the wall. Repeat for the right side of the door.
b)  Measure width of the door including the frame.

Sink and appliances
1-  Measure the distance between the center of the sink and the wall to its left. Repeat for the right side.
2-  Measure the width of the sink.
3-  Measure the distance between the left edge of the dishwasher and the wall to its left. Repeat for the right side.
4-  Measure the width of the dishwasher.
5-  Measure the distance between the left edge of the refrigerator and the wall to its left. Repeat for the right side.
6-  Measure the width of the refrigerator.
7-  Measure the distance between the left edge of the range and the wall to its left. Repeat for the right side.
8-  Measure the width of the range.

Home-Main page

 Back to Services

 

[ Home ] [ Up ]

Copyright © 1999- 2002 Dynasty Kitchen Cabinets LTD    
Webmaster: joe@dynastykitchen.com